Material Specifications (MLG)

Textured Grey Paper, Permanent Adhesive

Product Code: MLG

Label Construction

A typical label consists of 3 components. 

A face material is supported by the liner with special adhesive in the middle

1. Face Material

Natural, pure chlorinefree (ECF) cellulose paper feltmarked on both sides and pulpcoloured. Due to the nature of the raw material used, there may be slight variations in colour and appearance.Wet strength treatment.

1. MD - Machine Direction
2. CD - Cross Direction

2. Adhesive

Waterbased permanent acrylic adhesive. Good adhesion to wet surfaces at low temperatures. Especially designed for glass containers, with
excellent resistance to immersion in water/ice. The research centre ISEGA has given the adhesive SH6020 Plus approval according to the European requirements for indirect contact with foodstuffs and compliance with the rules of the Code of Federal Regulations, FDA, 21 CFR Ch.I(April 1, 2013 edition) 175.105 . According to the FDA regulations the adhesive must be separated from the foodstuffs by a functional barrier.

3. Release Liner / Backing

Supercalendered glassine paper, white.

1. MD - Machine Direction
2. CD - Cross Direction

Uses & Application

Specially designed for product labels of high added value bottled in glass (wine, licquors,champagne, oil, water)

Shelf Life

2 years, under storage conditions as defined by FINAT section 2.5 (20-25 ºC, 40-50% RH)

Last Updated April 2024