Material Specifications (TMP)

Matt White Tamper Proof Paper, Permanent 

Product Code: TMP

Label Construction

A typical label consists of 3 components. 

A face material is supported by the liner with special adhesive in the middle

1. Face Material

White wood-free, OBA free uncoated paper.

1. MD - Machine Direction
2. CD - Cross Direction

2. Adhesive

Permanent, acrylic, water borne adhesive properties.

3. Release Liner / Backing

Yellow transparent glassine backing paper.

1. MD - Machine Direction
2. CD - Cross Direction

Uses & Application

Product designed to provide a tamper-evident labelling feature for security applications where a highly flexible paper-based material is needed. Suitable for offset printing.

Shelf Life

2 years, under storage conditions as defined by FINAT section 2.5 (20-25ºC, 40-50% RH)

Certificates

Contact with foodstuff (BfR XXXVI) - Facestock and Liners (paper)

EN 1230 Sensorial analysis

Packaging and packaging waste Directive 94/62/CE

EN 71-3 Toy safety

Electric and electronic equipment (RoHS)

EN 71-3 Toy safety

EN 71-9 Toy safety

Direct contact with foodstuffs (ISEGA)

Disclaimer

The technical specifications given in this document are general in nature and based on our knowledge, experience and the information and recommendation provided by the material manufacturer, for which reason the suitability of our products for the end use to which they are put cannot be always guaranteed. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. It is the buyer’s responsibility to assess, test and ensure the suitability of each product for their end use through their own prior approval process; Flexi Labels cannot therefore be held responsible for unsuitable end use of its products. These technical product specifications supersede all previous editions. All information is subject to change without prior notice.

Last Updated April 2024