Material Specifications (MCPP)

Matt Clear Laser Polyester, Permanent Adhesive

Product Code: MCPP

Label Construction

A typical label consists of 3 components. 

A face material is supported by the liner with special adhesive in the middle

1. Face Material

Translucent, matt coated heat stabilised polyester film. Due to the pre-treatment, the film is printable by common label printing methods, for both laser and copier. Special inks for non-absorbent materials should be used.

1. MD - Machine Direction
2. CD - Cross Direction

2. Adhesive

Clear permanent look with an acrylic, water borne adhesive.

3. Release Liner / Backing

White woodfree kraft backing paper.

1. MD - Machine Direction
2. CD - Cross Direction

Uses & Application

Specially designed laser printable material for a wide range of applications; for placing onto clear products when translucency is needed, or subtly is required. For difficult conditions requiring strong adhesive and temperatures range high/low.

Shelf Life

2 years at + 20 ºC and RH 50%

Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.

Certificates

Contact with foodstuff (BfR XXXVI) - Facestock and Liners (paper)

EN 1230 Sensorial analysis

Packaging and packaging waste Directive 94/62/CE

EN 71-3 Toy safety

Electric and electronic equipment (RoHS)

EN 71-3 Toy safety

EN 71-9 Toy safety

Direct contact with foodstuffs (ISEGA)

Disclaimer

The technical specifications given in this document are general in nature and based on our knowledge, experience and the information and recommendation provided by the material manufacturer, for which reason the suitability of our products for the end use to which they are put cannot be always guaranteed. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. It is the buyer’s responsibility to assess, test and ensure the suitability of each product for their end use through their own prior approval process; Flexi Labels cannot therefore be held responsible for unsuitable end use of its products. These technical product specifications supersede all previous editions. All information is subject to change without prior notice.

Last Updated July 2024