Material Specifications (WTR)

Matt White Paper, Removable Adhesive

Product Code: WTR

Label Construction

A typical label consists of 3 components. 

A face material is supported by the liner with special adhesive in the middle

1. Face Material

Calendered uncoated woodfree paper.

1. MD - Machine Direction
2. CD - Cross Direction

2. Adhesive

Acrylic removable adhesive with clean removability from most surfaces. Trial is recommended when using this adhesive in new or unknown surfaces.

3. Release Liner / Backing

One-side coated white liner with good lay-flat characteristics. Suitable for sheeting. Available only in solid back.

1. MD - Machine Direction
2. CD - Cross Direction

Uses & Application

Ideal for all types of applications: variable label information (barcodes, expiry date, price, weight etc.)

Product approvals and usage certificates

Contact with foodstuff (BfR XXXVI) - Facestock and Liners (paper)

Toy safety European directive 2009/48/CE

Packaging and packaging waste Directive 94/62/CE

Electric and electronic equipment (RoHS)

EN 71-3 Toy safety

Shelf Life

1 year, under storage conditions as defined by FINAT section 2.5 (such as 20°C and RH 50%)

Disclaimer

The technical specifications given in this document are general in nature and based on our knowledge, experience and the information and recommendation provided by the material manufacturer, for which reason the suitability of our products for the end use to which they are put cannot be always guaranteed. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. It is the buyer’s responsibility to assess, test and ensure the suitability of each product for their end use through their own prior approval process; Flexi Labels cannot therefore be held responsible for unsuitable end use of its products. These technical product specifications supersede all previous editions. All information is subject to change without prior notice.

Last Updated April 2024