Material Specifications (FMC)

Textured Cream Paper, Permanent Adhesive

Product Code: FMC

Label Construction

A typical label consists of 3 components. 

A face material is supported by the liner with special adhesive in the middle

1. Face Material

Premium quality recycled paper with a felt-marked finish. Small impurities/ slight variations may appear, which is normal for a natural product made from recycled materials.

2. Adhesive

General purpose, water-based acrylic permanent adhesive. Good adhesion to all normal substrates – especially wet surfaces at low temperatures. Specifically designed for glass containers with water/ ice immersion.

3. Release Liner / Backing

Supercalendered glassine paper, white.

Uses & Application

Specifically designed for product labels of high added value in glass containers – such as wine, oil, water, and liquors.

Shelf Life

2 years, under storage conditions as defined by FINAT section 2.5 (20-25ºC, 40-50% RH).

Disclaimer

The technical specifications given in this document are general in nature and based on our knowledge, experience and the information and recommendation provided by the material manufacturer, for which reason the suitability of our products for the end use to which they are put cannot be always guaranteed. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. It is the buyer’s responsibility to assess, test and ensure the suitability of each product for their end use through their own prior approval process; Flexi Labels cannot therefore be held responsible for unsuitable end use of its products. These technical product specifications supersede all previous editions. All information is subject to change without prior notice.

Last Updated April 2024